Jeep Gladiator JT Rear CV Shaft DS-JT1350CV-R

Description

New Rear 1350 Series Jeep JT Gladiator CV Driveshaft with Solid cross/Gold series U-Joints, Pinion Flange, Transfer Case Flange and hardware

Application:

2020 and up Jeep JT Gladiator

We build all rear JT Gladiator driveshafts to the same measurement. We guarantee the measurement up to a 4 inch lift. If you have a lift over 4 inches we would require a measurement. Each lift kit is different, so just to be sure we build the perfect driveshaft for you, we offer $10 off your purchase with a custom measurement. Please use code 10off along with your measurement with the Jeep sitting on the tires ride height.

Product Description:

We build each 1350 series driveshaft with 3” x .083 wall tubing (which is double the strength of the OEM tubing), 1 1/2” slip and spline, solid cross/non-greaseable U-Joints, pinion flange, transfer case flange and hardware.

**Our driveshafts come with an 8 bolt pinion flange to bolt directly to OEM flange, which eliminates the need to remove the OEM flange and causing any damage to crush sleeve.**

We use all components from Spicer, NEAPCO, and Powertrain Industries.

CA Residents:   WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov