Jeep Gladiator JT CV Driveshaft Combo DS-JT1350CV-FR

Description

New Front and Rear 1350 Series Jeep JT Gladiator Driveshafts CV Combo with Solid cross/Gold series U-Joints, Pinion Flanges, Transfer Case Yoke (front), Transfer Case Flange (rear) and hardware

Application:

2020 and up Jeep JT Gladiator

We build all front and rear JT Gladiator driveshafts to the same measurements respectively. We guarantee the measurement up to a 4 inch lift. If you have a lift over 4 inches we would require a measurement. Each lift kit is different, so just to be sure we build the perfect driveshaft for you, we offer $10 off your purchase with a custom measurement. Please use code 10off along with your measurement with the Jeep sitting on the tires ride height.

Product Description:

FRONT DRIVESHAFT: We build each 1350 series driveshaft with 2” x .120 wall tubing (which is double the strength of the OEM tubing), 1 1/2” slip and spline, solid cross/non-greaseable U-Joints, pinion flange, transfer case yoke and hardware (pinion flange bolts will be reused).

**Our front driveshafts come with a 4 bolt pinion flange to bolt directly to OEM flange, which eliminates the need to remove the OEM flange and causing any damage to crush sleeve.**

REAR DRIVESHAFT: We build each 1350 series driveshaft with 3” x .083 wall tubing (which is double the strength of the OEM tubing), 1 1/2” slip and spline, solid cross/non-greaseable U-Joints, pinion flange, transfer case flange and hardware.

**Our rear driveshafts come with an 8 bolt pinion flange to bolt directly to OEM flange, which eliminates the need to remove the OEM flange and causing any damage to crush sleeve.**

We use all components from Spicer, NEAPCO, and Powertrain Industries.

CA Residents:   WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov