2007-18 Jeep JK 2 Door Rear Shaft DS-JK1350-R2D

Description

New Rear 1350 Series Jeep JK Wrangler Driveshaft with Solid cross/Gold series U-Joints, Pinion Yoke, Transfer Case Flange and hardware

Application:

2007 – 2018 Jeep JK Wrangler: 2 door model

*MAY REQUIRE REAR ADJUSTABLE CONTROL ARMS*

We build all rear JK driveshafts to the same measurements respectively. We guarantee the measurement up to a 4 inch lift. If you have a lift over 4 inches we would require a measurement. Each lift kit is different, so just to be sure we build the perfect driveshaft for you, we offer $10 off your purchase with a custom measurement. Please use code 10off along with your measurement with the Jeep sitting on the tires ride height.

Product Description:

We build each rear 1350 series driveshaft with 3” x .083 wall tubing (which is double the strength of the OEM tubing), 1 1/2” slip and spline, solid cross/non-greaseable U-Joints, pinion yoke, transfer case flange and hardware.

**Rear pinion flange will need to be removed and included pinion yoke will need to be installed.**

We use all components from Spicer, NEAPCO, and Powertrain Industries.

CA Residents:   WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov