2007-18 Jeep JK 4 Door Driveshaft Combo DS-JK1350-FR4D

Description

New Front and Rear 1350 Series Jeep JK Wrangler Driveshaft 4 Door with Solid cross/Gold series U-Joints, Pinion Flange (front), Pinion Yoke (rear), Transfer Case Flanges (front and rear) and hardware

Application:

2007 – 2018 Jeep JK Wrangler: 4 door models

We build all front and rear JK driveshafts to the same measurements respectively. We guarantee the measurement up to a 4 inch lift. If you have a lift over 4 inches we would require a measurement. Each lift kit is different, so just to be sure we build the perfect driveshaft for you, we offer $10 off your purchase with a custom measurement. Please use code 10off along with your measurement with the Jeep sitting on the tires ride height.

Product Description:

FRONT DRIVESHAFT: We build each front 1350 series driveshaft with 2” x .120 wall tubing (which is double the strength of the OEM tubing), 1 1/2” slip and spline, solid cross/non-greaseable U-Joints, pinion flange, transfer case flange and hardware (pinion flange bolts will be reused).

**Our front driveshafts come with a 4 bolt pinion flange to bolt directly to OEM flange, which eliminates the need to remove the OEM flange and causing any damage to crush sleeve.**

REAR DRIVESHAFT: We build each rear 1350 series driveshaft with 3” x .083 wall tubing (which is double the strength of the OEM tubing), 1 1/2” slip and spline, solid cross/non-greaseable U-Joints, pinion yoke, transfer case flange and hardware.

**Rear pinion flange will need to be removed and included pinion yoke will need to be installed.**

We use all components from Spicer, NEAPCO, and Powertrain Industries.

CA Residents:   WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov